Loading...
Serving Texarkana, TX and surrounding areas. (430) 278-0102
Cracked, stained, or worn-out concrete does not have to mean a full replacement. We resurface what you have and give it years of new life.
Concrete resurfacing in Texarkana applies a fresh bonded overlay over your existing slab - restoring appearance and surface durability without demolition - and most residential jobs like a driveway or patio are complete in one to two days.
If your driveway, patio, or garage floor looks rough but still feels solid underfoot, you are probably a good candidate for resurfacing. The surface layer wears out long before the structure underneath gives out - and replacing what is worn, rather than everything, saves a significant amount of money. Texarkana homeowners dealing with spider-web cracking, pitting, or staining from years of heat and heavy spring rains find that resurfacing is often the right call. If the slab also needs a protective coat afterward, our concrete sealing service picks up where the overlay leaves off.
The biggest thing that separates a resurfacing job that lasts from one that fails within a year is preparation. A crew that rushes the cleaning and prep step is setting you up for a surface that peels. We walk every slab before quoting so there are no surprises on the day of work.
Fine cracks spreading across your driveway or patio in a web pattern usually mean the top layer is wearing out while the structure beneath is still sound. This pattern is especially common on older Texarkana slabs that have been through decades of summer heat and clay soil movement. Resurfacing seals those cracks and gives you a fresh, durable surface without tearing out the whole slab.
Oil from a car, rust marks from patio furniture, or years of weathering can leave concrete looking permanently dirty no matter how hard you scrub. If the slab is structurally fine but just looks bad, resurfacing is often the most cost-effective way to restore its appearance and get a clean, uniform surface.
When the top layer of concrete starts to flake or pit, the surface becomes a tripping hazard and gets harder to clean. This kind of wear is common on Texarkana driveways and patios that have been through years of heavy rain, heat, and vehicle traffic without regular sealing or maintenance.
If your concrete has been spot-patched over the years, you know how mismatched it looks. Resurfacing covers the entire area with a uniform new layer, so you end up with a consistent finish instead of a patchwork surface that announces every old repair.
We apply polymer-modified overlay materials to cleaned and prepped slabs, creating a fresh bonded surface that can be left smooth, given a texture, or finished with a decorative stamped pattern. Before any material is applied, the slab is assessed for stability - because resurfacing over a slab that is still actively shifting from Texarkana's clay soils will not hold up. After the overlay cures, we offer self-leveling concrete overlays for floors with unevenness that a standard resurfacing pour does not fully address, and our pool deck coatings and resurfacing service handles outdoor wet-area applications with slip-resistant finishes. Every job includes a final walkthrough so you see the completed surface and can ask questions before the crew leaves.
Finish options range from plain gray overlays to color-stained surfaces, broom textures, and decorative stamped designs that mimic stone or brick. The right finish depends on how the surface is used - a driveway needs different texture than a patio. We walk through the options with you during the estimate visit so the finished result matches what you had in mind.
Suits garage floors, utility slabs, and surfaces that will receive a sealer or coating on top - gives a clean, even base at the lowest material cost.
Suits driveways and exterior walkways where slip resistance matters - a light texture gives grip without looking rough or unfinished.
Suits patios and entry areas where appearance is the priority - stamped patterns can mimic stone, slate, or brick at a lower cost than the real materials.
Suits homeowners who want the new surface to complement their home's exterior or landscaping - color is added to the overlay mix or applied as a top treatment.
Texarkana has a large number of homes built between the 1950s and 1980s, many of which have original concrete driveways, patios, and garage floors that are now 40 to 70 years old. Older slabs are prime candidates for resurfacing - the surface layer has worn through years of heat, heavy spring rain, and the constant expansion and contraction that Bowie County's clay soils create. Texarkana receives roughly 48 inches of rain per year, and water pooling on or around a worn slab speeds up surface deterioration. Before any overlay goes down, we look at drainage around the slab, because poor drainage is one of the main reasons a resurfaced surface fails early in this climate. Homeowners in Wake Village and surrounding communities deal with the same aging-slab conditions and are well within our service area.
The timing of a resurfacing job matters here more than in some parts of the country. Texarkana summers regularly push into the mid-90s with high humidity, and those conditions cause overlay materials to dry too fast - which leads to cracking and poor bonding. We plan jobs for spring or fall when possible, and when summer work is unavoidable, we adjust our schedule and methods accordingly. Homeowners across the area - including those in Texarkana, TX neighborhoods with mature trees and older sidewalks - find that resurfacing is a practical way to address decades of wear without the disruption and cost of full replacement.
Tell us what area you want resurfaced and roughly what condition it is in. We reply within one business day and schedule an in-person visit - no numbers are given over the phone before we see the slab.
We walk the area with you, check for cracks, soft spots, and drainage issues, and assess whether the slab is stable enough for resurfacing. You get a written estimate with a clear breakdown of scope, finish options, and price - no surprises added after work starts.
Clear vehicles, furniture, and planters before the crew arrives. The crew starts with thorough cleaning and any crack repair - this step is the most important part of the job. Then the overlay is applied and finished to the texture or pattern you selected.
After curing - at least 24 hours for foot traffic, 72 hours or more for vehicles - a sealer is applied. Before leaving, we walk you through care instructions, when to reseal, and what to watch for in the months ahead.
We walk the slab in person before quoting - no obligation, no sales pressure.
(430) 278-0102Bowie County's clay soils shift slabs over years of wet and dry cycles. We check whether that movement has stabilized before recommending resurfacing - because applying an overlay to a slab that is still actively moving is a waste of your money, and we would rather tell you that upfront than take a job that will fail.
Texarkana averages close to 48 inches of rain per year. Water pooling around or under an overlay is one of the most common reasons resurfaced concrete fails in this climate. We look at how water moves away from the slab during the assessment and flag any drainage concerns before the job begins.
You get a written quote that spells out what prep work is included, what finish you are getting, and what the price covers. If something changes on job day, we talk to you before proceeding - not after. The estimate you sign is what you pay.
A large share of the resurfacing work we do is on slabs from the 1950s through 1980s - homes built when concrete mixes and placement standards were different. Older slabs need more thorough prep and sometimes more extensive crack repair before an overlay bonds correctly. The American Concrete Institute guidance on overlay adhesion informs how we approach prep on aged surfaces.
Every one of these practices comes back to the same outcome: a surface that holds up through Texarkana's summers, spring rains, and seasonal soil movement - not just through the first season after the job is done.
When a floor has dips or uneven spots a standard overlay cannot fully address, self-leveling material flows into those low areas and creates a flat base.
Learn MoreRestore worn or stained pool deck concrete with a slip-resistant, weather-tolerant coating built for the wet conditions around a pool.
Learn MoreSpring and fall booking slots fill fast - reach out now to lock in your preferred date before the season gets away from you.