Loading...
Serving Texarkana, TX and surrounding areas. (430) 278-0102
Bare concrete that stains, dusts, and wears through under daily use is a liability. We install commercial and industrial epoxy systems in Texarkana that handle forklifts, chemicals, and foot traffic without falling apart.
Commercial and industrial epoxy floor coatings in Texarkana, TX bond a two-part resin system directly to the concrete slab, creating a seamless, sealed surface that resists oil, chemicals, and heavy traffic - most commercial jobs run two to four days depending on the size and condition of the slab.
If your warehouse, auto shop, or facility has concrete that is constantly dirty no matter how often you clean it, or if spills are soaking in and leaving stains, the slab is unprotected. Every vehicle drip, chemical spill, and wet boot is working its way into the surface. An epoxy coating seals all of that off and creates a floor that can be sanitized quickly, resists most industrial chemicals, and reflects light to brighten the space.
For residential garages and basement projects, see our epoxy floor coatings page. For facilities where the floor also needs to handle extreme thermal shock or caustic chemicals, we also offer urethane cement flooring, which is the tougher option for food processing and industrial kitchens.
Bare concrete is porous - oil, chemicals, and water soak right in and leave permanent stains. If your floor looks perpetually dirty no matter how often you clean it, or spills are soaking in rather than wiping up, the surface is unprotected and degrading. An epoxy coating seals the surface so spills stay on top.
Texarkana's clay soils shift with the seasons - wet winters and dry summers cause the ground to expand and contract, which stresses concrete slabs. If you see new cracks appearing or sections that feel slightly uneven, addressing them now and sealing with epoxy is far less expensive than waiting until the damage requires full slab replacement.
Concrete worn smooth over years of use becomes slippery when wet, and deteriorating concrete produces a fine dust that coats everything in the space. Both are real safety hazards in a commercial setting. Epoxy with a non-slip texture additive eliminates both problems by sealing and texturing the surface.
Getting a commercial space ready for a new tenant, listing it for sale, or preparing for a health or safety inspection - a fresh epoxy floor makes an immediate visual difference and signals the property has been maintained. In Texarkana's active industrial and warehouse leasing market along the I-30 corridor, a clean coated floor affects how quickly a space leases.
Not every commercial floor needs the same solution. A light retail space handles foot traffic very differently from a warehouse running forklifts or an auto shop dealing with oil and solvents every day. We match the coating system to how your floor is actually used. Our garage floor coatings are a popular choice for auto-related businesses and service bays, where the priority is a surface that resists oil and cleans up fast. For facilities that need something tougher than standard epoxy - extreme heat, steam, or harsh chemicals - we also offer urethane cement flooring, which is used in food processing plants, commercial kitchens, and industrial environments where standard epoxy would break down.
Every system we install starts with proper surface preparation - mechanical grinding to open up the concrete, followed by crack repair and a primer coat that improves adhesion. This is the part most cut-rate contractors skip, and it is the reason their work peels. Decorative options like color flakes or a safety-line layout are available for any system and add no additional cure time.
The right choice for retail, light commercial, and office spaces where the priority is a clean, sealed surface at a straightforward cost.
Thicker build-up designed for warehouses, manufacturing floors, and facilities running heavy equipment or dealing with chemical exposure.
A non-slip aggregate broadcast into the topcoat - required by many safety standards for commercial spaces and ideal for any area that sees wet conditions regularly.
Aisle markers, safety zones, and equipment boundaries applied during the coating process for warehouses and facilities that need OSHA-compliant floor markings.
Texarkana has a real industrial and logistics base - distribution centers, manufacturing facilities, and auto-related businesses along the I-30 and US-59 corridors. Those environments put concrete floors under constant stress. Forklifts, pallet jacks, chemical drips, and years of heavy foot traffic all wear down uncoated slabs. A significant portion of Texarkana's commercial building stock dates from the 1960s through the 1990s, and older slabs were often poured without the moisture barriers that are standard today - meaning moisture rising from below is a common failure point when epoxy is applied without proper testing. We test every slab for moisture before coating goes down. OSHA walking-working surface standards also shape what a commercial floor needs to meet, and a non-slip finish keeps you on the right side of those requirements.
We serve commercial and industrial customers throughout the Texarkana area, including facilities in Hooks, TX and Atlanta, TX, where industrial and manufacturing businesses operate on older slabs that need both repair and protection before a coating can hold.
Call or fill out our contact form with the basics - the type of facility, approximate square footage, and any known issues. We will get back to you within one business day to schedule a free on-site walk.
We walk the entire floor, check for cracks, test for moisture, and assess any oil contamination or previous coating that needs to come off. You get a written, itemized quote - not a vague one-line number.
We mechanically grind the concrete to open up the surface, fill cracks and spalls, and apply a primer coat that improves bond strength. This step takes the most time and produces the most dust - we use collection equipment to keep the mess manageable.
Epoxy is applied in layers per the system specified for your use case. Most floors are safe for light foot traffic within 24 hours and full vehicle or equipment use within 48 to 72 hours. We walk the finished floor with you before leaving.
We assess the slab, test for moisture, and give you a written estimate with no obligation. Response within one business day.
(430) 278-0102Older commercial slabs in Texarkana often have moisture coming up from below, and that is the most common reason epoxy fails in the first year. We test before we quote so there are no surprises - and we use moisture-mitigating primer when the slab needs it. The Concrete Network covers why this step matters in detail.
A warehouse running forklifts needs a different coating thickness than a retail store or a restaurant kitchen. We specify the right system for your actual use case before we quote - so you are not paying for more than you need, or getting less than what your floor requires.
We have worked on commercial and industrial floors throughout the Texarkana area - including facilities along the I-30 and US-59 corridors where heavy use, clay soil movement, and older slab construction are all factors at once. We understand what these floors face and how to prepare them correctly.
We carry current general liability insurance and workers' compensation coverage. We will hand you the certificate before work starts. If a worker is injured on your property with an uninsured contractor, the exposure is yours - ask for proof from every contractor you consider.
Put these together and you get a floor that holds up to what you actually run through it, installed by a contractor who is accountable before, during, and after the job.
Epoxy and polyaspartic coating systems sized for residential and small commercial garages, with the same surface preparation standards we apply to larger facilities.
Learn MoreA step above standard epoxy for environments with extreme heat, steam, or caustic chemicals - the standard choice for food processing and industrial kitchen floors.
Learn MoreSpring and fall booking windows fill up - contact us now and we will assess your slab and give you a written quote before the season slips away.